1. Home
  2. Products
  3. Valve Remote Control System
  4. Hydraulic Valve Remote Control System

Hydraulic Valve Remote Control System

Hydraulic valve remote control systems use oil pressure as the power to control the hydraulic valve. Acting instructions are sent out to the console using an analogue board or computer, and is then conducted using the actuator on the spot. Finally, the position signal is fed back to the console. The control system conveniently and quickly controls the remote valve and monitors the valve status in real time. It is primarily used in systems that require remote control for piping valves, such as a ballast tank system, bilge water system, cargo liquid system of oil tanker and chemical tanker, well drilling platform, petroleum industry and more.

    1. YHS Double Acting Hydraulic Actuator
    2. YHS Double Acting Hydraulic Actuator The YHS hydraulic actuator is driven by hydraulic power transmission system. Its performance is stable, low consumption and low noise, making it ideal for use in pinion and rack transmission systems.
    1. YHD Single Acting Hydraulic Actuator
    2. YHD Single Acting Hydraulic Actuator The YHD single acting hydraulic actuator is driven using a hydraulic power transmission system that features a compact structure, steady performance, low energy consumption and low noise levels.
    1. YDF Double Acting Hydraulic Actuator
    2. YDF Double Acting Hydraulic Actuator The YDF hydraulic actuator is driven using a hydraulic power transmission system, and features a steady performance, low energy consumption and a low noise level, all thanks to the pinion and rack transmission system.
    1. DYDF Single Acting Hydraulic Actuator
    2. DYDF Single Acting Hydraulic Actuator The DYDF hydraulic actuator is driven using a hydraulic power transmission system, and features a steady performance, low energy consumption and low noise levels, all of which are achieved through the use of a pinion and rack transmission system.
    1. Double Control Hydraulic Shut-off Non-Return Valve
    2. Double Control Hydraulic Shut-off Non-Return Valve The hydraulic shut-off valve is a centralized remote control, which is more convenient than traditional manual shut-off valves.
      Viscosity of hydraulic oil: 22~46cSt/40℃
    1. Hydraulic Power Pump Unit
    2. Hydraulic Power Pump Unit The pump unit is equipped with two sets of identical pumps to back each other up, including a motor unit, electric control cabinet and other necessary hydraulic components, such as the hydraulic filter, overflow valve, discharge valve, pressure relay unit, pressure gauge, pressure sensor, and level meter.
    1. Solenoid Valve Cabinet
    2. Solenoid Valve Cabinet The solenoid valve cabinet consists of the valve block unit, solenoid directional valve, pressure gauge, emergency valve block, shut-off valve, quick coupling, pressure switch (optional), and valve opening position dictator (optional).
    1. Solenoid Valve Cabinet & Communication Cabinet
    2. Solenoid Valve Cabinet & Communication Cabinet The solenoid valve cabinet & communication cabinet consists of a valve block unit, solenoid directional valve, emergency valve block, pressure gauge unit (optional), valve opening position dictator (optional), PLC module, power module, communication module and relay unit.
    1. GDP Fixed Hand Pump Unit
    2. GDP Fixed Hand Pump Unit The fixed hand pump station is a combination of the hand pump, 3-position 4-way steering valve and valve blocks. One-way valve opening position dictator is also optional.
    1. JSP Fixed Hand Pump Unit
    2. JSP Fixed Hand Pump Unit The JSP fixed hand pump unit is a combination of the hand wheel, 2-way plunger pump, non-return valve, hydraulic lock, shuttle valve, filter, overflow valve and quick coupling. The fixed hand pump unit can be attached on deck, and work in open air.
    1. YDP Movable Hand Pump Unit
    2. YDP Movable Hand Pump Unit The YDP moveable hand pump unit is a combination of a hand pump, 2/4way steering valve, non-return valve block and hydraulic hose.
      Max. working pressure: 12MPa
      Viscosity of hydraulic oil: 22~46cSt/40℃

Nantong Navigation Machinery Group is a major manufacturing enterprise with several branches all engaged in the fabrication of marine machinery and marine support equipment. The company's history dates back to 1973, when our company was focusing on the production of marine backflushing filters, self-cleaning filters, marine valve remote control systems, marine engine hydraulic units, and more.

Index
valve management, marine valve control, ship control
Inquiry Form
Contact Us

Nantong Navigation Machinery Group Co.,Ltd.

Add.: No. 6 Yongxing Road, Gangzha Economic Development Area, Nantong City, Jiangsu Province
Tel.: +86-513-83520061
Fax: +86-513-83527356

Other Products